U. Symptom: Blank Screen Checklist
Unavi Technical Guide Checklist
Symptom: Blank screen
UNAVI MEMO
When tech support call is received regarding a blank screen or no LCD display, follow the guideline below and record the problem with detailed information as outlined below:
Example 1 – LCD screen turns off during normal operation; proceed with RA
Example 2 – System does not boot and no sound from the radio
# |
Procedural Checklist |
1 |
LCD turns off during normal operation? Does screen turn on when booting up? |
2 |
If LCD turns off during operation, does it turn off when using a specific feature or audio mode? |
3 |
If LCD turns off during operation, does it occur within the same time frame? |
4 |
If LCD turns off during operation, does it occur if any of the touch screen buttons are pressed? |
5 |
Any sound from radio through factory speakers? (Use steering wheel control buttons to check radio status) |
6 |
If screen does not turn on during boot-up, does it turn on after pressing the RESET button? |
7 |
Number of occurrences: (1, 2, 7, etc.) |
- If there are no sound from the factory radio, check fuses and power cables.
- If the radio is functioning normally but the LCD is still blank, try disconnecting the negative (-) terminal of the car battery for about 30 minutes and restart the system.
- Use GROUND wire located on the SMART cable to ground it to the vehicle chassis frame.
Inspect for any peeled off cable sheath and/or damaged outer insulation; wrap it around using an electrical tape as necessary.