Cart is empty
Symptom: Clock is off by one or two hours
My clock is off by one or two hours or time shown is incorrect. How do I set my clock?
First, press “CLOCK” from the main menu and check the DST settings, which can be manually configured by selecting ‘DST OFF’, ‘DST +1’ or ‘DST +2’ depending on your time zone.
Times displayed on Unavi system is automatically set by receiving GPS signals from satellites and maintained by a clock circuit called RTC (Real-Time Clock). If the system has been turned off for a long period of time and/or left in an area with no GPS signal, please give some time until the initial system boot-up is completed and move the vehicle to an open area where signal can be received to adjust to current time. A GPS receiver can shorten its startup time by comparing the current time, according to its RTC, with the time at which it last had a valid signal.[2] If it has been less than a few hours then the previous ephemeris is still usable.
Note: On certain models, the clock shown on the radio display screen must be adjusted from the setup menu of the factory radio. Please refer to the vehicle manufacturer Owner’s Manual.
Dealer Locator
Products
UNAVI BULLETIN
Downloads/Resources
Tech Support Knowledgebase
Suggestion Box
Unavi Wants to Hear From You!
Connect With Us!
